Front Bumper Fascia Replacement
WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Front Bumper Fascia Replacement
| Callout | Component Name |
|---|---|
Preliminary Procedures
|
|
| 1 | Front Fascia Retainer (Qty: 6) |
| 2 | Front Fascia Retainer (Qty: 6) |
| 3 | Front Fascia Bolt (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 10 N.m (89 lb in) |
| 4 | Front Fascia Nut (Qty: 4) Tighten: 10 N.m (89 lb in) |
| 5 | Front Fascia Cover Tip: Disconnect the electrical connector. |