Front Fender Replacement

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Fender Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
Preliminary Procedures Raise and support vehicle. Refer to Lifting and Jacking the Vehicle . Remove front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement . Remove rocker panel molding. Refer to Rocker Panel Molding Replacement .
1	Bolts, Front Fender (Qty: 2) Tighten: 10 N.m (89 lb in)
2	Bolts, Front Fascia (Qty: 2) Tighten: 10 N.m (89 lb in)
3	Nut, Front Fender Tighten: 10 N.m (89 lb in)
4	Bolt, Front Fascia Tighten: 10 N.m (89 lb in)
5	Bolts, Front Fender (Qty: 3)
6	Fender, Front Fender