LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Steering Wheel & Steering Column) >> Repair Instructions >> Repairing Scratched Wood Steering Wheels >> Repair Procedure

Repair Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering wheel. Refer to Steering Wheel Replacement .
  2. Wash the wood section of the wheel with wax and grease remover.
  3. Mask off the non-wood area of the steering wheel.
  4. IMPORTANT: Do NOT sand through the clear.
  5. Sand with 400 grit sand paper first. Finish sanding with 600 grit.
  6. Wash the wood section of the wheel again with wax and grease remover.
  7. Clear coat the steering wheel. Refer to the GM Approved Refinish Materials Booklet, GM 4901 M-D-2003 (English) or M-D-F2003 (French).
  8. Install the steering wheel. Refer to Steering Wheel Replacement .