LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Repair Instructions >> Instrument Cluster Replacement >> Removal Procedure

Removal Procedure

  1. Remove the left closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  2. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .
  3. Remove the instrument panel cluster (IPC) bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement (Chevrolet) or Instrument Panel Cluster Trim Plate Bezel Replacement (GMC, Buick) .
    4. Fig 1: View Of Instrument Panel Cluster (IPC)
    GM692029Courtesy of GENERAL MOTORS CORP.
  4. Remove the screws retaining the IPC to the I/P.
  5. Partially remove the IPC from the I/P in order to gain access to the electrical connector.
  6. Disconnect the electrical connector from the IPC.
  7. Remove the IPC from the I/P.
scientia non olet · About LEMON Manuals