LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Wiper Motor Replacement - Rear (Trailblazer, Envoy) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Rear Wiper Motor Components
    GM632378Courtesy of GENERAL MOTORS CORP.
  1. Remove the wiper arm. Refer to Wiper Arm Replacement - Rear (TrailBlazer SS)  or Wiper Arm Replacement - Rear (TrailBlazer, Envoy) .
  2. Remove the nut and spacer from the wiper motor shaft.
  3. Remove the interior trim panel from the liftgate. Refer to Liftgate Trim Panel Replacement .
  4. Disconnect the wiper motor electrical connector.
  5. Remove the 2 bolts retaining the wiper motor to the liftgate.
  6. Remove the wiper motor.