LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Instrument Panel Trim And Console Trim >> Repair Instructions >> Instrument Panel Cluster Trim Plate Bezel Replacement (GMC, Buick) >> Removal Procedure

Removal Procedure

  1. Tilt the steering wheel to the full down position.
  2. Remove the left closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  3. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .
    4. Fig 1: Identifying Knee Bolster Trim Panel & Retaining Screws
    GM740924Courtesy of GENERAL MOTORS CORP.
  4. Remove the screws that retain the bezel to the instrument panel.
  5. Remove the bezel from the instrument panel.
scientia non olet · About LEMON Manuals