Marker Lamps Inoperative

Step	Action	Yes	No
Schematic Reference: Exterior Lights Schematics Connector End View Reference: Lighting Systems Connector End Views
1	Did you perform the Diagnostic System Check - Vehicle?	Go to Step 2	Go to Diagnostic System Check - Vehicle
2	Verify that the marker lamps are inoperative. Do the marker lamps operate normally?	Go to Testing for Intermittent Conditions and Poor Connections	Go to Step 3
3	Place the headlamp switch in the PARK position. Do the park lamps operate normally?	Go to Step 4	Go to Symptoms - Lighting Systems
4	Inspect the inoperative bulb and socket for an open filament or poor terminal connections. Does any lamp have an open filament or poor terminal connections?	Go to Step 6	Go to Step 5
5	Repair the open or high resistance in one of the following circuits. Refer to Wiring Repairs : Marker lamp supply voltage Front turn signal lamp supply voltage-Domestic vehicle only Ground-Export vehicle only Did you complete the repair?	Go to Step 7	-
6	Replace the defective bulb or repair/replace the socket. Refer to Wiring Repairs . Did you complete the repair?	Go to Step 7	-
7	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 3