License Lamps Inoperative

Step	Action	Yes	No
Schematic Reference: Exterior Lights Schematics Connector End View Reference: Lighting Systems Connector End Views
1	Did you perform the Diagnostic System Check - Vehicle?	Go to Step 2	Go to Diagnostic System Check - Vehicle
2	Verify that the license lamps are inoperative. Do the license lamps operate normally?	Go to Testing for Intermittent Conditions and Poor Connections	Go to Step 3
3	Is the left tail lamp inoperative also?	Go to Step 5	Go to Step 4
4	Inspect the inoperative bulbs/sockets for open filaments or poor terminal contact. Does any lamp have an open filament or poor terminal contact?	Go to Step 7	Go to Step 6
5	Repair the short to ground in the license lamp supply voltage circuit or left tail lamp tail supply voltage circuit. Refer to Wiring Repairs . Did you complete the repair?	Go to Step 8	-
6	Repair the open or high resistance in the license lamps supply voltage circuit or ground circuit. Refer to Wiring Repairs . Did you complete the repair?	Go to Step 8	-
7	Replace the inoperative bulb or repair/replace the socket. Refer to Wiring Repairs or Rear License Lamp Replacement . Did you complete the repair?	Go to Step 8	-
8	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 3