Cornering Lamps Always On

Step	Action	Yes	No
Schematic Reference: Exterior Lights Schematics Connector End View Reference: Lighting Systems Connector End Views
1	Did you perform the Diagnostic System Check - Vehicle?	Go to Step 2	Go to Diagnostic System Check - Vehicle
2	Turn ON the ignition, with the engine OFF. Turn the park lamps ON. Activate the turn signal switch in both directions to illuminate the cornering lamps. Did the cornering lamps operate properly?	Go to Testing for Intermittent Conditions and Poor Connections	Go to Step 3
3	Do the front parking lamps operate properly?	Go to Step 4	Go to Symptoms - Lighting Systems
4	Test for a short to positive voltage in the cornering lamp supply voltage circuit. Refer to Circuit Testing and Wiring Repairs . Did you find and correct a condition?	Go to Step 6	Go to Step 5
5	Replace the multifunction turn signal switch. Refer to Turn Signal Multifunction Switch Replacement . Did you complete the replacement?	Go to Step 6	-
6	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2