Fog Lamp Indicator Inoperative

Step	Action	Yes	No
Schematic Reference: Fog Lights Schematics Connector End View Reference: Lighting Systems Connector End Views
1	Did you perform the Diagnostic System Check - Vehicle?	Go to Step 2	Go to Diagnostic System Check - Vehicle
2	Verify that the fog lamp indicator is inoperative. Does the fog lamp indicator operate normally?	Go to Testing for Intermittent Conditions and Poor Connections	Go to Step 3
3	Do the fog lamps operate normally?	Go to Step 4	Go to Symptoms - Lighting Systems
4	Test the fog lamp relay control circuit that provides the ground for the fog lamp indicator for an open or high resistance. Refer to Circuit Testing or Wiring Repairs . Did you find and correct the condition?	Go to Step 6	Go to Step 5
5	Replace the headlamp switch. Refer to Headlamp Switch Replacement . Did you complete the repair?	Go to Step 6	-
6	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 3