LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1998 >> Trooper S, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 3.2L & 3.5L V6 >> Removal & Installation >> Rear Main Seal >> Installation

Rear Main Seal: Installation

  1. Ensure all sealing surfaces are clean. Apply engine oil to lip of oil seal. Using Seal Installer (J-39201), install seal in seal housing. DO NOT reuse flywheel or flexplate bolts. Ensure no oil is present in threads of crankshaft.
  2. Install flywheel. Tighten all bolts to specification. Tighten flywheel bolts in a diagonal pattern. See TORQUE SPECIFICATIONS . To install remaining components, reverse removal procedure.
scientia non olet · About LEMON Manuals