DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms(Trouble diagnosis content) | DTC detection condition | |||
|---|---|---|---|---|---|
| P272A | Motor A(Motor A Control Circuit) | Diagnosis condition | When Ignition switch is ON | ||
| Signal (terminal) | - | ||||
| Threshold | When a detection signal of DTC P272A-00 is transmitted from the electric shift system.
NOTE:
|
||||
| Diagnosis delay time | - | ||||
POSSIBLE CAUSE
- Harness or connectors
- Shift actuator relay A circuit is open.
- Shift actuator motor A (U phase / V phase / W phase) circuit is open.
- Shift actuator relay A (OFF stuck or internal disconnection)
- Motor coil A (shift actuator)
- Electric shift control module
FAIL-SAFE
Shifting operation is prohibited
NOTE:
When either motor A circuit or motor B circuit is judged as malfunction, only disconnecting the malfunctioning motor circuit enables to shift the gears.