Diagnosis Procedure
- CHECK FUSE (ACCESSORY POWER SUPPLY)
-
- Ignition switch OFF.
- Check 10 A fuse [No. 22, located in fuse block (J/B)]. Refer to Terminal Arrangement in appropriate Wiring Diagram. Refer to Wiring Diagram .
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Replace the blown fuse after repairing the affected circuit if a fuse is blown.
-
- CHECK A/C AUTO AMP. ACCESSORY POWER SUPPLY
Is the inspection result normal?
YES>>
GO TO 3.
NO>>
Repair harness or connector between A/C auto amp. and fuse.
- CHECK A/C AUTO AMP. GROUND CIRCUIT FOR OPEN
Is the inspection result normal?
YES>>
Replace A/C auto amp. Refer to Removal and Installation .
NO>>
Repair harness or connector.