Component Inspection

1. 1. Ignition switch OFF.
   2. Disconnect ambient sensor connector.
   3. Check resistance between ambient sensor terminals.

      Ambient sensor		Condition	Resistance: kΩ
      Terminals		Temperature: °C (°F)
      1	2	-40 (-40)	52.04
      		-30 (-22)	28.61
      		-20 (-4)	16.50
      		-10 (14)	9.92
      		0 (32)	6.19
      		10 (50)	3.99
      		15 (59)	3.24
      		20 (68)	2.65
      		25 (77)	2.19
      		30 (86)	1.81
      		40 (104)	1.27
      		50 (122)	.91
      		60 (140)	.66
      		70 (158)	.49
      		80 (176)	.37
      		90 (194)	.29

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Replace ambient sensor. Refer to Removal and Installation .