Diagnosis Procedure
- PARAMETER DOWNLOAD OF ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
- Perform parameter download of ABS actuator and electric unit (control unit). Refer to Work Procedure
.CAUTION:
Do not replace the ABS actuator and electric unit (control unit) until "Self Diagnostic Result" has been completed.
>>
GO TO 2.
- Perform parameter download of ABS actuator and electric unit (control unit). Refer to Work Procedure
.
- CHECK SELF DIAGNOSTIC RESULT
CONSULT Replace the ABS actuator and electric unit (control unit) even if other DTC's are displayed along with "U1321-55" in "Self Diagnostic Result" mode of "ABS".
>>
Replace the ABS actuator and electric unit (control unit). Refer to Removal and Installation .