Work Procedure

1. CONSULT Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to Description .
   NOTE: If "READ CONFIGURATION" cannot be used, use the "WRITE CONFIGURATION - Manual selection" after replacing AFS control unit.

>>

GO TO 2.

1. Replace AFS control unit. Refer to Removal and Installation .

>>

GO TO 3.

1. CONSULT Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to Description .

>>

GO TO 4.

1. CONSULT Perform "SENSOR INITIALIZE". Refer to Description .

>>

Work End.