Work Procedure

Description 

When replacing or removing the Head Up Display unit, distortion calibration of the display and adjustment of the display position are required.

Work Procedure 

1. REPLACE HEAD UP DISPLAY UNIT 
   1. Replace Head Up Display unit. Refer to Removal and Installation .

   >>

   GO TO 2.

2. PERFORM CALIBRATION 
   1. Perform Head Up Display calibration. Refer to Description .

   >>

   GO TO 3.

3. ADJUST DISPLAY SCREEN 
   1. Adjust display screen position. Refer to Switch Name and Function .

   >>

   GO TO 4.

4. OPERATION CHECK 
   1. Check the display of Head Up Display.

   Is the displayed normal?

   YES>>

   Work End.

   NO>>

   Perform display adjustment again. GO TO 3.