TOE CONTROL LINK : Removal & Installation: Removal
- Remove tires with power tool. Refer to ROAD WHEEL TIRE : Removal & Installation .
- Set jack under axle housing.CAUTION:
- Check the stable condition when using a jack.
- Never damage axle housing with a jack.
- Separate dynamic digital suspension or shock absorber from axle housing. Refer to REAR COIL SPRING AND SHOCK ABSORBER : Removal & Installation .
- Remove eccentric disk, adjusting bolt, mounting bolt, and nut. Remove toe control link. Refer to TOE CONTROL LINK : Exploded View .
- Perform inspection after removal. Refer to TOE CONTROL LINK : Inspection .