LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Symptom Diagnosis & Removal And Installation) (Except Hybrid) >> Removal And Installation >> A/T Shift Selector >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Shift the selector lever to "P" position.
  2. Remove control rod from A/T shift selector assembly.
  3. Shift the selector lever to "M" position.
  4. Remove knob cover (A) below selector lever downward.
    GNSJSDIA1676Z-676Courtesy of NISSAN NORTH AMERICA, INC.
  5. Pull lock pin (1) out of selector lever knob (2).
  6. Remove selector lever knob.
  7. Remove center console assembly. Refer to Exploded View .
  8. Shift the selector lever to "P" position.
  9. Disconnect A/T shift selector connector.
  10. Remove A/T shift selector assembly mounting bolts.
  11. Remove harness from A/T shift selector assembly.
  12. Remove A/T shift selector assembly from the vehicle.
  13. Remove snap pin, washers, insulator, collar and pivot pin from A/T shift selector assembly.
  14. Remove dust cover and dust cover plate from A/T shift selector assembly.
  15. Remove adapter from A/T shift selector assembly.
scientia non olet · About LEMON Manuals