LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Transfer Case (Except Hybrid)) >> Removal And Installation >> Front Oil Seal >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the drain plug to drain the transfer fluid. Refer to Draining .
  2. Remove the front propeller shaft. Refer to Removal and Installation (VQ37VHR), Removal and Installation (VK56VD).
  3. Remove front oil seal.
    CAUTION: Never damage the front case and front drive shaft.
scientia non olet · About LEMON Manuals