LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (5.6L) (Except Hybrid) >> Removal And Installation >> Air Cleaner And Air Duct >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove engine cover. Refer to Exploded View .
  2. Remove air duct (inlet).
  3. Disconnect mass air flow sensor harness connector.
  4. Disconnect PCV hose.
  5. Remove air cleaner cover assembly & mass air flow sensor assembly and air duct by disconnecting their joints.
    • Add matching marks, if necessary for easier installation.
  6. Remove mass air flow sensor from air cleaner cover assembly, if necessary.
    CAUTION: Handle mass air flow sensor according to the following instructions.
    • Never impact it.
    • Never disassemble it.
    • Never touch its sensor.
scientia non olet · About LEMON Manuals