LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats (Circuit Diagnosis) (Except Hybrid) >> Circuit Diagnosis >> Seat Cushion Thermal Electric Unit Sensor >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK SEAT CUSHION THERMAL ELECTRIC UNIT SENSOR SIGNAL 
    1. Turn ignition switch ON.
    2. Check voltage between seat cushion thermal electric unit harness connector and ground.

      (+)

      (-)

      Condition

      Voltage (V)

      (Approx.)

      Seat cushion thermal electric unit

      Connector

      Terminal

      Driver side

      B533

      69

      Ground

      Climate controlled seat operated

      1 - 5

      Passenger side

      B563

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    GO TO 2.

  2. CHECK SEAT CUSHION THERMAL ELECTRIC UNIT SENSOR CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect climate controlled seat control unit connector and seat cushion thermal electric unit connector.
    3. Check continuity between climate controlled seat control unit harness connector and seat cushion thermal electric unit harness connector.

      Climate controlled seat control unit

      Seat cushion thermal electric unit

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      Driver side

      B660

      69

      B533

      69

      Existed

      Passenger side

      B662

      B563

    4. Check continuity between climate controlled seat control unit harness connector and ground.

      Climate controlled seat control unit

      Ground

      Continuity

      Connector

      Terminal

      Driver side

      B660

      69

      Not existed

      Passenger side

      B662

    Is the inspection result normal?

    YES

    Replace climate controlled seat control unit.

    NO

    Repair or replace harness.

  3. CHECK SEAT CUSHION THERMAL ELECTRIC UNIT SENSOR GROUND CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect climate controlled seat control unit connector and seat cushion thermal electric unit connector.
    3. Check continuity between climate controlled seat control unit harness connector and seat cushion thermal electric unit harness connector.

      Climate controlled seat control unit

      Seat cushion thermal electric unit

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      Driver side

      B660

      70

      B533

      70

      Existed

      Passenger side

      B662

      B563

    4. Check continuity between climate controlled seat control unit harness connector and ground.

      Climate controlled seat control unit

      Ground

      Continuity

      Connector

      Terminal

      Driver side

      B660

      70

      Not existed

      Passenger side

      B662

    Is the inspection result normal?

    YES

    GO TO 4.

    NO

    Repair or replace harness.

  4. CHECK SEAT CUSHION THERMAL ELECTRIC UNIT SENSOR 

    Check seat cushion thermal electric unit sensor.

    Refer to Component Inspection .

    Is the inspection result normal?

    YES

    GO TO 5.

    NO

    Replace seat cushion thermal electric unit.

  5. CHECK INTERMITTENT INCIDENT 

    Refer to Intermittent Incident .

    INSPECTION END