LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats (Circuit Diagnosis) (Except Hybrid) >> Circuit Diagnosis >> Seat Cushion Thermal Electric Unit Sensor >> Component Inspection

Component Inspection

  1. CHECK SEAT CUSHION THERMAL ELECTRIC UNIT SENSOR 
    1. Turn ignition switch OFF.
    2. Disconnect seat cushion thermal electric unit connector.
    3. Check resistance between seat cushion thermal electric unit terminals.

    Seat cushion thermal electric unit

    Resistance (k Ohm)

    (Approx.)

    Terminal

    69

    70

    1 *

    * : When sensor temperature is 25 deg. C (77 deg. F).

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace seat cushion thermal electric unit.

scientia non olet · About LEMON Manuals