LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats (Circuit Diagnosis) (Except Hybrid) >> Circuit Diagnosis >> Power Supply And Ground Circuit >> Front Seat Cushion Heater >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK FUSE 

    Check that the following fuse is not blown (open).

    Signal name

    Fuse No.

    Battery power supply

    61 (15 A)

    Is the inspection result normal?

    YES

    GO TO 2.

    NO

    Replace the blown (open) fuse after repairing the affected circuit.

  2. CHECK FRONT SEAT CUSHION HEATER POWER SUPPLY 
    1. Turn ignition switch OFF.
    2. Disconnect front seat cushion heater connector.
    3. Turn ignition switch ON.
    4. Check voltage between front seat cushion heater harness connector and ground.

      (+)

      (-)

      Voltage (V)

      (Approx.)

      Front seat cushion heater

      Connector

      Terminal

      Driver side

      B534

      77

      Ground

      Battery voltage

      Passenger side

      B574

    Is the inspection result normal?

    YES

    GO TO 4.

    NO

    GO TO 3.

  3. CHECK FRONT SEAT CUSHION HEATER POWER SUPPLY CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect front heated seat relay.
    3. Check continuity between front seat cushion heater harness connector and front heated seat relay terminal connector.

      Front seat cushion heater

      Front heated seat relay

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      Driver side

      B534

      77

      M70

      3

      Existed

      Passenger side

      B574

    4. Check continuity between front seat cushion heater harness connector and ground.

      Front seat cushion heater

      Ground

      Continuity

      Connector

      Terminal

      Driver side

      B534

      77

      Not existed

      Passenger side

      B574

    Is the inspection result normal?

    YES

    Repair or replace harness between front heated seat relay and fuse holder.

    NO

    Repair or replace harness between front seat cushion heater and front heated seat relay.

  4. CHECK FRONT HEATED SEAT OPERATION SIGNAL 

    Check voltage between front seat cushion heater harness connector and ground.

    (+)

    (-)

    Condition

    Voltage (V)

    (Approx.)

    Front seat cushion heater

    Connector

    Terminal

    Driver side

    B534

    73

    Ground

    Front heated seat switch

    ON

    Battery voltage

    OFF

    0

    Passenger side

    B574

    ON

    Battery voltage

    OFF

    0

    Is the inspection result normal?

    YES

    GO TO 7.

    NO

    GO TO 5.

  5. CHECK FRONT HEATED SEAT OPERATION SIGNAL CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect front heated seat switch connector.
    3. Check continuity between front seat cushion heater harness connector and front heated seat switch harness connector.

      Front seat cushion heater

      Front heated seat switch

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      Driver side

      B534

      73

      M198

      1

      Existed

      Passenger side

      B574

      M199

    4. Check continuity between seat cushion heater harness connector and ground.

      Front seat cushion heater

      Ground

      Continuity

      Connector

      Terminal

      Driver side

      B534

      73

      Not existed

      Passenger side

      B574

    Is the inspection result normal?

    YES

    GO TO 6.

    NO

    Repair or replace harness.

  6. CHECK FRONT HEATED SEAT SWITCH 

    Check front heated seat switch.

    Refer to Component Inspection .

    Is the inspection result normal?

    YES

    GO TO 8.

    NO

    Replace front heated seat switch.

  7. CHECK FRONT SEAT CUSHION HEATER GROUND CIRCUIT 
    1. Turn ignition switch OFF.
    2. Check continuity between front seat cushion heater harness connector and ground.

    Front seat cushion heater

    Ground

    Continuity

    Connector

    Terminal

    Driver side

    B534

    74

    Exists

    Passenger side

    B574

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Repair or replace harness.

  8. CHECK INTERMITTENT INCIDENT 

    Check intermittent incident.

    Refer to Intermittent Incident .

    INSPECTION END