Component Inspection

1. Turn ignition OFF.
2. Disconnect front heated seat switch connector.
3. Check resistance between front heated seat switch terminals under the following conditions.

   Front heated seat switch		Condition		Resistance (k Ohm) (Approx.)
   Terminal
   5	1	Front heated seat switch	ON	0
   			OFF	INF.
   	2		OFF	INF.
   			1 (Min. temperature)	2.400
   			2	1.800
   			3	1.200
   			4	0.910
   			5	0.620
   			6 (Max. temperature)	0.348

Is the inspection result normal?

YES

INSPECTION END

NO

Replace front heated seat switch.