Component Function Check

Check Trunk Lid Opener Cancel Switch position.

Does Trunk Lid Opener Cancel Switch turn OFF (CANCEL)?

YES

Turn on Trunk Lid Opener Cancel Switch.

NO

GO TO 2.

1. Turn Ignition Switch ON.
2. Select "TRUNK/BACK DOOR" in "Active Test" mode of "INTELLIGENT KEY" of "BCM" using CONSULT.
3. Touch "OPEN".
4. Check that trunk lid opens normally.

Is the inspection result normal?

YES

GO TO 3.

NO

Refer to Diagnosis Procedure .

1. Select "TRNK/HAT MNTR" in "Data Monitor" mode of "INTELLIGENT KEY" of "BCM" using CONSULT.
2. Check that CONSULT display varies according to the trunk lid position.

   Monitor item	Condition		Status
   TRNK/HAT MNTR	Trunk lid	Open	On
   		Closed	Off

Is the inspection result normal?

YES

INSPECTION END

NO

Refer to Diagnosis Procedure .