Diagnosis Procedure

1. Check system setting.

   Refer to Special Repair Requirement .

2. Check the operation.

Is the inspection result normal?

YES

Entry/Exit function is OK.

NO

GO TO 2.

1. Perform system initialization.

   Refer to Special Repair Requirement .

2. Check the operation.

Is the inspection result normal?

YES

Entry/Exit function is OK.

NO

GO TO 3.

Check front door switch (driver side).

Refer to Component Function Check .

Is the inspection result normal?

YES

GO TO 4.

NO

Repair or replace the malfunction parts.

Confirm the operation again.

Is the result normal?

YES

Check intermittent incident. Refer to Intermittent Incident .

NO

GO TO 1.