Component Function Check

1. Select "DOOR LOCK" of "BCM" using CONSULT.
2. Select "DOOR SW-DR", "DOOR SW-AS", "DOOR SW-RL", "DOOR SW-RR" in "DATA MONITOR" mode.
3. Check that the function operates normally according to the following conditions.

   Monitor item	Condition		Status
   DOOR SW-DR	Driver side door	Open	On
   		Closed	Off
   DOOR SW-AS	Passenger side door	Open	On
   		Closed	Off
   DOOR SW-RL	Rear side door LH	Open	On
   		Closed	Off
   DOOR SW-RR	Rear side door RH	Open	On
   		Closed	Off

Is the inspection result normal?

YES

Door switch is OK.

NO

Refer to Diagnosis Procedure .