DTC Confirmation Procedure
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
WITH CONSULT
- Select "DATA MONITOR" mode of "HV BAT" using CONSULT.
- Drive the vehicle, according to driving pattern B.
Driving pattern B : DRIVING PATTERN
Is P0A7E detected?
YES
Refer to DIAGNOSIS PROCEDURE .
NO-1
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO-2
Confirmation after repair: INSPECTION END