DTC Index
| Display Contents Of CONSULT | Time | Diagnostic Item Is Detected When... | Refer To |
|---|---|---|---|
| CAN COMM CIRCUIT [U1000] |
CRNT, 1 - 39 | When Unified Meter And A/C Amp. is not transmitting or receiving CAN Communication signal for 2 seconds or more. | DIAGNOSIS PROCEDURE |
| CONTROL UNIT (CAN) [U1010] |
CRNT, 1 - 39 | When detecting error during the initial diagnosis of CAN controller of Unified Meter And A/C Amp. | DIAGNOSIS PROCEDURE |
| COMM ERROR 1 [B2201] |
CRNT, 1 - 39 | If a Communication error is present in the Communication line between Unified Meter And A/C Amp. and Combination Meter for 2 seconds or more. | DIAGNOSIS PROCEDURE |
| COMM ERROR 2 [B2202] |
CRNT, 1 - 39 | If a Communication error is present in the Communication line between Unified Meter And A/C Amp. and Combination Meter for 2 seconds or more. | DIAGNOSIS PROCEDURE |
| VEHICLE SPEED [B2205] |
CRNT, 1 - 39 | The abnormal vehicle speed signal is input from ABS Actuator And Electric Unit (Control Unit) for 2 seconds or more. | DIAGNOSIS PROCEDURE |
| ENGINE SPEED [B2267] |
CRNT, 1 - 39 | If ECM continuously transmits abnormal engine speed signals for 2 seconds or more. | DIAGNOSIS PROCEDURE |
| WATER TEMP [B2268] |
CRNT, 1 - 39 | If ECM continuously transmits abnormal engine coolant temperature signals for 60 seconds or more. | DIAGNOSIS PROCEDURE |