Diagnosis Procedure: U11A6-87

Perform the trouble diagnosis for CAN communication system. Refer to TROUBLE DIAGNOSIS FLOW CHART .

Is the inspection result normal?

YES 

GO TO STEP 2. 

NO 

Repair or replace the malfunctioning parts.

Perform "Self Diagnostic Result" of "Side radar LH".

Is DTC detected?

YES 

Perform diagnosis procedure on the detected DTC. Refer to DTC INDEX .

NO 

GO TO STEP 3. 

Perform "Self Diagnostic Result" of "Side radar RH".

Is DTC detected?

YES 

Perform diagnosis procedure on the detected DTC. Refer to DTC INDEX .

NO-1 

GO TO STEP 4. 

Perform "Self Diagnostic Result" of "ICC sensor".

Is DTC detected?

YES 

Perform diagnosis procedure on the detected DTC. Refer to DTC INDEX .

NO 

INSPECTION END