DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

PRECONDITIONING

If "DTC CONFIRMATION PROCEDURE" is previously conducted, always turn ignition switch OFF and wait at least 10 seconds before performing the next test.

GO TO STEP 2 .

PERFORM COMPONENT INSPECTION

Refer to COMPONENT FUNCTION CHECK .

NOTE:
If it is caused by a temporary incorporation of foreign matter, normal status might be recovered.

Is the inspection result normal?

YES-1

To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

YES-2

Confirmation after repair: INSPECTION END

NO

Go to DIAGNOSIS PROCEDURE .