LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> QX70 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Front Suspension (2WD) (VR30DDTT) (Except Hybrid)) >> Removal And Installation >> Transverse Link >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove tires with power tool. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .
  2. Remove engine under cover. Refer to REMOVAL AND INSTALLATION .
  3. Remove stabilizer connecting rod and dynamic digital suspension from transverse link. Refer to REMOVAL AND INSTALLATION .
  4. Separate steering outer socket from steering knuckle.
  5. Remove transverse link from steering knuckle. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .
  6. Set jack under steering knuckle.
    CAUTION:
    • Check the stable condition when using a jack.
    • Never damage steering knuckle with a jack.
  7. Remove mounting bolts, nuts, and stopper bushing, and then remove transverse link from front suspension member.
  8. Perform inspection after removal. Refer to INSPECTION .
scientia non olet · About LEMON Manuals