Diagnostic Test

1. Check system setting.

   Refer to SPECIAL REPAIR REQUIREMENT .

2. Check the operation.

Is the inspection result normal?

YES 

Entry/Exit function is OK.

NO 

GO TO STEP 2  .

1. Perform system initialization.

   Refer to SPECIAL REPAIR REQUIREMENT .

2. Check the operation.

Is the inspection result normal?

YES 

Entry/Exit function is OK.

NO 

GO TO STEP 3  .

Check front door switch (driver side).

Refer to COMPONENT FUNCTION CHECK .

Is the inspection result normal?

YES 

GO TO STEP 4  .

NO 

Repair or replace the malfunction parts.

Confirm the operation again.

Is the result normal?

YES 

Check intermittent incident. Refer to INTERMITTENT INCIDENT .

NO 

GO TO STEP 1  .