LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> Q50 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Automatic Transmission (Symptom Diagnosis & Removal And Installation) (Except Hybrid)) >> Removal And Installation >> Air Breather >> VR30DDTT >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove catalyst converter support bracket (bank 1) and catalyst converter (bank 1). Refer to Exploded View .
  2. Remove propeller shaft assembly (front). Refer to Removal and Installation . (AWD models)
  3. Remove clips SYMBOL from brackets.
    GNSJSDIA4261Z-261Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL

    : Vehicle front
  4. Remove air breather box SYMBOL from bracket with suitable tool.
    GNSJSDIA4262Z-262Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL

    : Pawl
  5. Remove air breather hose SYMBOL from air breather tube SYMBOL .

    SYMBOL

    : Vehicle front
    GNSJSDIA4263Z-263Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals