Component Function Check

CHECK FUNCTION

Select "INTELLIGENT KEY" of "BCM" using CONSULT.
Select "REQ SW-DR", "REQ SW-AS" in "DATA MONITOR" mode.
Check that the function operates normally according to the following conditions.

Monitor item	Condition		Status
REQ SW -DR	Driver side door request switch	Pressed	ON
REQ SW -DR	Driver side door request switch	Released	OFF
REQ SW -AS	Passenger side door request switch	Pressed	ON
REQ SW -AS	Passenger side door request switch	Released	OFF

Is the inspection result normal?

YES

Front door request switch is OK.

NO

Refer to DIAGNOSIS PROCEDURE .