LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC C1205: AWD Actuator Relay >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different variant/trim than selected.

  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO STEP 2  .

  2. PERFORM DTC CONFIRMATION

    G-20With CONSULT 

    1. Turn the ignition switch OFF to ON.
    2. Perform self-diagnosis for "ALL MODE AWD/4WD".

    Is DTC "C1205" detected?

    YES 

    Proceed to DIAGNOSIS PROCEDURE .

    NO 

    INSPECTION END