Diagnostic Test
WARNING: This page is about a different variant/trim than selected.
- CHECK POWER SUPPLY AND GROUND CIRCUIT
Perform the trouble diagnosis for power supply and ground circuit. Refer to DIAGNOSIS PROCEDURE .
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Repair or replace the error-detected parts.
- PERFORM SELF-DIAGNOSIS (AWD CONTROL UNIT)
With CONSULT
Perform self-diagnosis for "ALL MODE AWD/4WD".
Is any detected?
YES
Check the DTC. Refer to DTC INDEX .
NO
GO TO STEP 3 .
- PERFORM SELF-DIAGNOSIS (COMBINATION METER)
With CONSULT
Perform self-diagnosis for "METER/M&A".
Is any detected?
YES
Check the DTC. Refer to DTC INDEX .
NO
Perform the trouble diagnosis for combination meter power supply circuit. Refer to DIAGNOSIS PROCEDURE .