LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Transfer Case (Except Hybrid)) >> Unit Disassembly And Assembly >> Transfer Case >> Disassembly

Transfer Case: Disassembly

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove transfer cover. Refer to DISASSEMBLY .
  2. Remove ring gear shaft assembly. Refer to DISASSEMBLY .
  3. Remove drive pinion assembly. Refer to DISASSEMBLY .
  4. Remove O-ring from transfer case.
    CAUTION:
    • Never use a tool.
    • Never damage transfer case.
  5. Remove oil seals (1).
    G08856156Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Never damage transfer case.

  6. Remove baffle plate (1).
    G08856157Courtesy of NISSAN NORTH AMERICA, INC.
  7. Remove the ring gear bearing adjusting shim (transfer case side) (1) and ring gear bearing outer race (transfer case side) (2) by tapping from the 2 cutouts (ARROWF ) on the transfer case.
    G08856158Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Never damage transfer case.

  8. Remove plug and gasket.
  9. Perform inspection after disassembly. Refer to INSPECTION .
scientia non olet · About LEMON Manuals