LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Front Suspension (Except Hybrid)) >> Unit Removal And Installation >> Front Suspension Member >> Inspection >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check wheel sensor harness for proper connection. Refer to EXPLODED VIEW - FRONT WHEEL SENSOR .
  2. Check wheel alignment. Refer to INSPECTION AND ADJUSTMENT .
  3. Adjust the neutral position of the steering angle sensor. Refer to DESCRIPTION .
scientia non olet · About LEMON Manuals