LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Exterior Lighting System (Except Hybrid)) >> DTC/Circuit Diagnosis >> Hazard Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK HAZARD SWITCH SIGNAL BY CONSULT

    G-20 CONSULT DATA MONITOR

    1. Turn ignition switch ON.
    2. Select HAZARD SW of BCM (FLASHER) DATA MONITOR item.
    3. While operating the hazard switch, check the monitor status.
    Monitor item Condition Monitor status
    HAZARD SW Hazard switch ON On
    OFF Off

    Is the inspection result normal?

    YES 

    Hazard switch circuit is normal.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals