LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Intelligent Cruise Control System (DTC/Circuit Diagnosis) (ICC) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC C10B7: Yaw Rate Sensor >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Start the engine.
    2. Turn the MAIN switch of ICC system ON.
    3. Perform "All DTC Reading" with CONSULT.
    4. Check if the "C10B7" is detected as the current malfunction in "Self Diagnostic Result" of "LASER/RADAR".

    Is "C10B7" detected as the current malfunction?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO 

    Inspection End.

scientia non olet · About LEMON Manuals