Diagnosis Procedure
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK COMBINATION METER INPUT SIGNAL
Select the "Data Monitor" for the "METER/M&A" and check the "BUZZER" monitor value.
BUZZER Under the condition of buzzer input : On Except above : Off Is the inspection result normal?
YES
Replace combination meter. Refer to REMOVAL AND INSTALLATION .
NO
GO TO 2
- CHECK FRONT DOOR SWITCH LH SIGNAL CIRCUIT
Perform inspection of the front door switch LH signal circuit. Refer to DIAGNOSIS PROCEDURE .
Is the inspection result normal?
YES
GO TO 3
NO
Repair or replace harness or connectors.
- CHECK FRONT DOOR SWITCH LH
Perform a unit inspection for the front door switch LH. Refer to COMPONENT INSPECTION .
Is the inspection result normal?
YES
Replace the BCM. Refer to REMOVAL AND INSTALLATION .
NO
Replace the front door switch LH. Refer to REMOVAL AND INSTALLATION .