LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Door & Lock (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Door Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK DOOR SWITCH

    1. Turn ignition switch OFF.
    2. Disconnect malfunctioning door switch connector.
    3. Check continuity between door switch terminals.
      Door switch Condition Continuity
      Terminal
      3 Ground contact is part of the switch. Door switch Pressed No
      Released Yes

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace malfunction door switch. Refer to REMOVAL AND INSTALLATION .