LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Engine Control System (DTC/Circuit Diagnosis) (VQ35DE) (Except Hybrid) (3 Of 3)) >> DTC/Circuit Diagnosis >> Cooling Fan >> Component Function Check >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK COOLING FAN FUNCTION

    G-20 With CONSULT

    1. Turn ignition switch ON.
    2. Perform "FAN DUTY CONTROL" in "ACTIVE TEST" mode of "ENGINE" using CONSULT.
    3. Check that cooling fan speed varies according to the percentage.

    G-21 Without CONSULT

    1. Activate IPDM E/R auto active test and check cooling fan motors operation. Refer to DIAGNOSIS DESCRIPTION .
    2. Check that cooling fan operates.

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Proceed to DIAGNOSIS PROCEDURE .