LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Door & Lock (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Ground Circuit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Regarding Wiring Diagram information, refer to WIRING DIAGRAM .

  1. CHECK GROUND CIRCUIT

    1. Turn ignition switch OFF.
    2. Disconnect automatic back door control module connector.
    3. Check continuity between automatic back door control module harness connector and ground.
    Automatic back door control module Ground Continuity
    Connector Terminal
    B56 32 Yes
    28
    B55 4 (Except For Mexico)

    Is the inspection result normal?

    YES 

    Replace automatic back door control module. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace harness.

scientia non olet · About LEMON Manuals