Removal And Installation: Installation

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of the removal.

CAUTION:

Do not reuse the rear suspension arm nuts at the rear suspension member.
Do not reuse the rear lower link nuts.
Do not reuse the front lower link nuts.
Do not reuse exhaust gaskets.

Perform the final tightening of the parts under unladen conditions with the tires on the ground.
Check the wheel sensor harness for proper connection. Refer to EXPLODED VIEW - REAR WHEEL SENSOR .
Adjust the parking brake operation (stroke). Refer to INSPECTION AND ADJUSTMENT .
Check the wheel alignment. Refer to INSPECTION AND ADJUSTMENT .
Adjust the neutral position of the steering angle sensor. Refer to DESCRIPTION .