Diagnosis Procedure
- CHECK AROUND VIEW MONITOR CONTROL UNIT POWER SUPPLY AND GROUND CIRCUIT
Check around view monitor control unit power supply and ground circuit. Refer to DIAGNOSIS PROCEDURE .
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Repair or replace malfunctioning parts.
- CHECK AV COMMUNICATION CIRCUIT FOR OPEN
- Turn ignition switch OFF.
- Disconnect display control unit harness connector and around view monitor control unit harness connector.
- Check the continuity between display control unit harness connector and around view monitor control unit harness connector.
Display control unit Around view monitor control unit Continuity Connector Terminal Connector Terminal M100 16 B50 20 Existed 28 19
Is the inspection result normal?
YES
Replace around view monitor control unit. Refer to REMOVAL AND INSTALLATION .
NO
Repair or replace malfunctioning parts.