LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Meter, Warning Lamp & Indicator (Except Hybrid)) >> Ecu Diagnosis Information >> Combination Meter >> DTC Index

DTC Index

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
Display contents of CONSULT Diagnostic item is detected when... Refer to
CAN COMM CIRCUIT
[U1000]
When combination meter is not transmitting or receiving CAN communication signal for 2 seconds or more. DIAGNOSIS PROCEDURE
CONTROL UNIT (CAN)
[U1010]
When detecting error during the initial diagnosis of the CAN controller of combination meter. DIAGNOSIS PROCEDURE
VEHICLE SPEED CIRC
[B2205]
The abnormal vehicle speed signal is input from the ABS actuator and electric unit (control unit) for 2 seconds or more. DIAGNOSIS PROCEDURE
TACHO METER
[B2267]
If ECM continuously transmits abnormal engine speed signals for 2 seconds or more. DIAGNOSIS PROCEDURE
WATER TEMP METER
[B2268]
If ECM continuously transmits abnormal engine coolant temperature signals for 60 seconds or more. DIAGNOSIS PROCEDURE