LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC B2205: Vehicle Speed >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK COMBINATION METER INPUT SIGNAL

    1. Start engine and select METER/M&A on CONSULT.
    2. Using SPEED METER on DATA MONITOR, compare the value of DATA MONITOR with speedometer pointer of combination meter. Speedometer and DATA MONITOR indications should be close.

    Is the inspection result normal?

    YES 

    Perform ABS actuator and electric unit (control unit) self-diagnosis. Refer to CONSULT FUNCTION (with ICC) or CONSULT FUNCTION (without ICC).

    NO 

    Replace combination meter. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals